Graham's Vintage Tackle
www.VintageTackle.net

Fixed Spool Reels

Unless stated otherwise, all fixed spool reels are left hand wind and in good usable condition.

UK delivery charges will be added when you click the "Buy Now" button.

Reels are listed in alphabetical order by make and model.

I often have more items waiting to be listed, so if you can't find what you want on this website, or would like some help choosing, please 'phone me...

Click an image to enlarge...



Mitchell (300) Version 3 (predecessor of Mitchell 300, made in France circa 1947-49)

Early French made Version 3 with Mitchell engraved on side plate without the model number. No serial number (serial numbers were not applied before 1949) but what appeared to be a small letter "c" stamped on the foot. Specification includes a bronze drive shaft, one-piece claw bail with hardened line guide, angled anti-reverse switch, spring loaded folding handle with black anodised conical aluminium knob, correct deep & shallow all-metal push-button spools with spool depth indicated on each drag knob (see 3rd photo). Perfect working order with very smooth action, no mechanical wear and retaining most of its original finish. Very good condition. Highly useable and collectable. Fully serviced and ready to go fishing again...  

GBP 65.00 (Item reference SRL338) (Sold to GR)




Recent addition
Garcia Mitchell 300 (Made in France circa 1969)

French made with angled screw-lock folding handle and contoured knob, one-piece bail, tungsten carbide line guide, Oilite drive shaft bearing, traditional audible anti-reverse and complete with upgraded snag-proof deep & shallow quick-release spools. A mechanically perfect smooth runner in near-mint condition complete with leaflets & guarantee card in correct display box. Serviced and ready to go fishing for the first time...

GBP 75.00 (Item reference SRL348)
Important: For delivery to non-UK destinations please see international shipping then contact me before ordering
. (Sold to PM)




Garcia Mitchell 301 (Made in France circa 1967)

Right-hand-wind version of the classic French made Mitchell 300 with Oilite drive-shaft bearing, angled screw-lock folding handle and contoured knob, one-piece bail with tungsten carbide line guide. Slight deterioration to paintwork consistent with age & fair use but mechanically perfect. A very smooth runner in perfect working order and complete with original shallow spare spool. Fully serviced and ready to use...

GBP 42.00 (Item reference SRL427)  




Garcia Mitchell 308 (Made in France circa 1970)

Garcia Mitchell 308 (aka Mitchell Prince), the smallest French made Mitchell, designed for light freshwater fishing. Featuring ball-bearing action, "Planamatic" wind, 4.5:1 gear ratio, one-piece bail with tungsten carbide line guide, push-button spool and spring loaded folding handle with contoured knob. Trotting enthusiasts should note that the bail rotates in the opposite direction to most other vintage Mitchells, thereby bringing the line to the inside of your forefinger when trotting - much better! Slight paint loss from rims and underside of body. Excellent condition and mechanically perfect. Collectable & highly useable. Fitted with shallow spool and complete with deep spool in spool tub (no cracks!). Fully serviced and ready to use...

GBP 58.00 (Item reference SRL462)
Important: For delivery to non-UK destinations please see international shipping then contact me before ordering
. (Sold to PM)




Mitchell 309 (Made in France circa 1970)

Rare Mitchell 309, right hand wind version of the 308 (aka Mitchell Prince), the smallest traditional French made Mitchell. Featuring ball-bearing action, "Planamatic" wind, 4.5:1 gear ratio, one-piece bail with tungsten line guide, push-button spool and angled screw-lock folding handle with contoured knob. Trotting enthusiasts should note that the bail rotates in the opposite direction to most other vintage Mitchells, thereby bringing the line to the inside of your forefinger when trotting - much better for line control and striking! Mechanically perfect with slight paint loss from backplate and foot (not noticeable in use). Complete in original display box with spare spool in spool tub. Fully serviced and ready to use...

GBP 52.00 (Item reference SRL331)
Important: For delivery to non-UK destinations please see international shipping then contact me before ordering.   




Garcia Mitchell 330 (Made in France circa 1959)

French made forerunner to the Mitchell Match with legendary automatic "finger-dab" hard-chromed bail arm, safety "bail-lock", Oilite drive shaft bearing, traditional audible anti-reverse and correct deep & shallow push-button quick-release spools with 3-prong drag knobs. A nice smooth runner with zero mechanical wear and retaining most of its original finish. Complete with original display box. Excellent condition. Serviced and ready to use...

GBP 68.00 (Item reference SRL351)  
Important: For delivery to non-UK destinations please see international shipping then contact me before ordering. 




Mitchell 440A MATCH (Made in France circa 1981)

French made Mitchell 440A MATCH with legendary "finger-dab" bail, roller bearings in rotor & drive shaft, 4.9:1 gear ratio, audible anti-reverse, angled folding handle with traditional contoured knob and push-button match spool, blue colour. A very smooth runner with slight paint loss but mechanically perfect. Complete with original spare match spool in correct screw-top tub. Fully serviced...

GBP 50.00 (Item reference SRL458) 
Important: For delivery to non-UK destinations please see international shipping then contact me before ordering
. (Sold to MW)




Mitchell 3350Z (Made in France circa 1984)

High quality French made Mitchell slightly larger and more sturdy than the traditional 300 series and packed with features... ambidextrous design, angled folding handle, stainless steel ball bearings, silent anti-reverse, hardened roller bail, long stroke high capacity heavy duty push-button skirted spool (same spool as the late model 300S and interchangeable with all 300S/301S, 900/901, 3360, 4450 and 4450Z reels) takes 220yds 10lb mono, Mint condition in slightly tatty original box ...

GBP 35.00 (Item reference SRL435) 
Important: For delivery to non-UK destinations please see international shipping then contact me before ordering
. (Sold to Phil)  




Mitchell 300/301 Spare Spools, vintage and modern.

To fit all traditional 300-style reels with the following model numbers...

300, 300A, 300C, 300DL, 300PRO, 301, 301A, 301C, 301PRO, Otomatic, 330, 330A, 331, 331ARapid, 350, 350A, 351, 351A400, 400A, 400G, 401, 410, 410A, 410DL, 411, 411A, Match, Match L, 440, 440A, 441, 441A, 500, 501, 510, 511, 540, 541, 810, 811, 840, 840A, 841, 841A (but not their "skirted" spool versions).

I have several variations to suit different age reels, from vintage metal to more modern graphite, different capacities, some in original spool containers, various conditions from "tatty" to "mint", but all cleaned and serviced...

Prices range from GBP 5.00 to 15.00 depending on condition and rarity (please 'phone to discuss your requirements) 

I also have a few spare spools for other Mitchells including model numbers 208/208S, 302, 304/305, 308/309, 320/321, 324/325, 402, 408/409, 710, 1140RD/1140G, 1165RD/2165RD, 3330/3330Z, 4430/4430Z, Excellence 20, Performance/Excellence 60, ELX300. 


AERIAL CENTREPINS    OTHER CENTREPINS

FLY REELS    MULTIPLIER REELS

COARSE & SPINNING RODS   FLY RODS

OTHER TACKLE & ACCESSORIES

CONTACT & ORDERING   
NEWS & LINKS

HOME



Subscribe to my Mail List to be notified by eMail of all New Additions & Special Offers etc.

 
 Click here to see if I have anything for sale on eBay.  Click here to check my eBay Feedback.

(This page was last updated 23rd August 2019).